|
Driver Amplifiers
RGDA01
RGDA01 is a high efficiency GaAs Ep-HEMT MMIC power amplifier. The device is designed for use in the 802.11a/b/g WLAN systems
Frequency range : 2 to 6 GHz
Supply Voltage/Current : +3.3 V/199 mA
Pout : 20 dBm
CATV LINE Amplifiers
RTV01
The CATV Line Amplifier designed using GaAs Enhancement mode pHEMT Process. The CATV amplifier provided in a low-cost industry-standard 14 Pin SOIC Package. The above amplifier has 11.5dB Gain.
Frequency range :40 MHz to 870 MHz
Supply Voltage/Current : ±8V/199 mA
P1dB : 30 dBm
Low Noise Amplifiers
RGLNA06
RGLNA06 is a broadband high efficiency GaAs p-HEMT Low noise amplifier designed for WLAN MIMO system.
Frequency range :2 to 6 GHz
Supply Voltage/Current : +3.3V/14mA
Noise Figure:1.5dB @2.4GHz,
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
,
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
.
Die Size:1 mm X 1 mm .
RGLNA02
RGLNA02 is a broadband high efficiency GaAs p-HEMT Low noise amplifier designed for WLAN MIMO system.
Frequency range :2 to 6 GHz
Supply Voltage/Current : +3V/18mA
Noise Figure:1.8dB @2GHz
Die Size:.6 mm X .55 mm .
RGLNA03
RGLNA03 is a broadband high efficiency GaAs p-HEMT Low noise amplifier designed for WLAN MIMO system.
Frequency range :2 to 12 GHz
Supply Voltage/Current : +3V/12mA
Noise Figure:1.5dB @2GHz
RGLNA10
RGLNA10 is a broadband high efficiency GaAs p-HEMT Low noise amplifier designed for WLAN MIMO system.
Frequency range :7 to 26 GHz
Supply Voltage/Current : +3.3V/86mA
Noise Figure: 3.7 - 4 dB
Gain: 19.7 dB
Pout: +14 dB
RGLNA01
RGLNA01 is a broadband high efficiency GaAs p-HEMT Low noise amplifier designed for WLAN MIMO system.
Frequency range :0.7 to 3 GHz
Supply Voltage/Current : +3.3V/15 mA
Noise Figure:1.55dB @1GHz
RGLNA11
RGLNA11 is a broadband high efficiency GaAs p-HEMT Low noise amplifier designed for WLAN MIMO system.
Frequency range :2.0 to 6.0 GHz
Supply Voltage/Current :+3.3 V/37 mA
Noise Figure:1.5 dB @3.5 GHz
Front End Module
WLAN
RFISFRT01
RFISFRT01 is a monolithic integrated transceiver Front End Module suitable for 802.11b/g (2.4GHz) application. The IC contains all of the required components to implement the RF function of the transmitter and receiver except passive filters. The output of the LNA is made available as an output to permit the insertion of a BPF between the LNA and the Rx out. The output of PA is also made available to insert a BPF in between PA and Transceiver chipset. A single supply voltage and a positive supply switch controls simplify bias requirements.
WiMax
RFISFR01
A RF front-end module that integrates band switching and is a transceiver front end designed for low voltage operation. The module contains wide band power amplifier, wide band low noise amplifiers, band pass, low pass internal matching. The RFISFR01 is targeted for high volume WiMax application
|
Download PDF