GaAs IP cores (New)
|
Power Amplifier
- RPA11 : 2.4-2.5 GHz, 25dBm Power Amplifier
- RPA11A : 2.1-2.8 GHz,1W High Power Amplifier
- RPA12 : 4.9-5.9 GHz, 20dBm Linear Power Amplifier
- RPA14 : 3 -4.5 GHz, Power amplifier with 24dBm Power Output
- RPA15 : 0.80-0.96 GHz, 2Watts High Power Amplifier
- RTV12 : 40 to 870 MHz, CATV Line Amplifier
Low Noise Amplifier
- RLN23 : 0.4 to 4 GHz wideband LNA for Cellular, WCDMA, PCS application
- RLW01 : 1.7 to 2.5 GHz low current LNA
- RLW02 : 1.7 to 2.5 GHz LNA with high linearity
- RULN01 : 3-10 GHz LNA for Ultra wideband application
- RLN301 : 5GHz LNA for WLAN 802.11a Application
- RLW02 : 1.7 to 2.5 GHz LNA with high linearity
- RLNS01 : 0.7 - 3 GHz LNA for Cellular and WLAN Application
Mixer
- RM11 : 1 to 6GHz Gillbert cell Downconversion Mixer
- RM12 : 1.7 to 2.5 GHz Double Balanced diode Mixer
- RM11A : 1 to 6 GHz; Low noise, Gilbert Cell Broadband mixer
Driver Amplifier
-
RDA01 : 2 - 4 GHz Driver Amplifier with 25dBm power output
-
RDA11 : 2-8 GHz Flat Gain Amplifier
- RDAHF01 : 8-16 GHz Driver Amplifier with 20dBm power output
-
RDAT01 : 2 - 10 GHz tunable, Low Power Output, Wideband Driver amplifier
-
RDA11N : 2.0 to 8.0 GHz .The flat gain driver amplifier with Noise figure of 1.6 dB@ 2GHz
-
RDA12N : 2 - 8 GHz tunable, Low Power Output, Wideband Driver amplifier
Switch
- RSW11 : SP2T switch from 10MHz to 2 GHz
Automatic Gain Controller
- RAGC01 : 2.0 to 8.0 GHz high efficiency 0.5um GaAs Enhancement mode p-HEMT Automatic Gain Control Amplifier.
Gain Block
- RUGB01 : 3.0 to 10.0 Gain Block Amplifier for UWB Application
Please note:
Specifications shown in the datasheets are for designs under development and may change without notice.
|
|
|
